CNC Mini Lathe

I registered because I want to get into CNC lathing, but I dont want to do the mod myself. And so many small CNC lathes are too much money. What is out there I foudn this one: http://cgi.ebay.com/ws/eBayISAPI.dll...m220279605743 ...

Im doing the CNC convesrion as per Ron Steeles plans for the 7x10, 7x12 or 7x14 mini lathe. These plans specfiy a lead screw from McMaster.com (part 6350K15). This is a 3/8 idameter, 0.5 pitch, 4start stainless (303) ball screw. ...

And a regular mini lathe (microlux 7x14) With the mini lathe mounted to teh table of my mill, and a lathe tool mounted to the neck of my spindle. I can perform CNC lathe operatoins, with no extra hardware I simply use the mills CNC ...

I just bought a Compact 5 CNC nad there is not a key for the switch. Anyoen know how to remove the switch so I can have a key made Ive taken off the back panel and cant tell how the switch is removed. Any hael is appreciatde.

Tailstock Spindle (LA030200) is clamped in a 3 jaws chuck of the Centre Lathe adn supported by a tailstock centre as well as being cut by using a Right Hand Sied Turning Tool. Spindle Pulley (LA010203) is cut by using a Right Hand Side ...

I have bought a 7x14 habror Freight mini Lathe, and am in the process of CNC retrofitting it. I am first flolowing many of hte helpful lathe modifications found here and other aprts of the internet. ...